MARKETS

Safety alert issued over shuttle car incident

THE need for the rapid response function on the Joy shuttle car 15SC32 has been questioned after a faulty foot pedal spring caused one of the vehicles to lunge forward about half a metre – fortunately, no one was injured in the incident.

Staff Reporter
Safety alert issued over shuttle car incident

The Queensland Mines Inspectorate issued a safety alert to all Queensland coal mines.

Regional inspector of mines Michael Downs said in normal start-up, the spring-loaded pump start switch is turned to the “start” position, then released to the “run” position as the pump operates. The hydraulic brake pressure increases and operates the traction switch that allows the foot pedal to move the shuttle car.

A rapid response function gives the ability for the car to be driven immediately in an emergency. The pump start switch is held in the start position and the foot pedal operated; immediately the car is able to move, independent of the hydraulic brake circuit.

An investigation revealed a broken foot pedal return spring that allowed sagging of the foot pedal providing a signal to move the car.

“A combination of the foot pedal depressed, the car in emergency [rapid response] mode and the pump switch held in the start position caused the lunge forward of the car,” Downs said.

He said the foot pedal spring was replaced on the shuttle car, but the possibility of re-occurrence was not completely removed.

“The need for the rapid response function was questioned. As a trial, the rapid response circuit has been disabled and may become a permanent modification.”

As a result of the incident, the following recommendations have been made:

  • Examine the foot pedal operation of shuttle cars of this model to ensure that at rest, the traction switch is in a neutral position;
  • Examine the integrity of the foot pedal springs ie length and strength;
  • Risk assess the need for a rapid response function;
  • Ensure shuttle car operators, mechanics and electricians are aware of the possibility of unplanned movement – as in this incident; and
  • Ensure the maintenance system includes routine inspection of the foot pedal spring and traction switch neutral position adjustment.

Joy’s director engineering Mick Sams told ILN that the OEM agreed with the recommendations set out by the inspectorate.

“We would also encourage that mines risk assess whether they need that rapid response function, which is no longer used on newer Joy shuttle car models,”he said.

Sams said Joy will release a service bulletin to customers outlining the correct procedure for disabling the rapid response function of the car.

“If they are going to disable it, they need to know how to do it properly,” he said.

TOPICS:

A growing series of reports, each focused on a key discussion point for the mining sector, brought to you by the Mining Monthly Intelligence team.

A growing series of reports, each focused on a key discussion point for the mining sector, brought to you by the Mining Monthly Intelligence team.

editions

Mining Magazine Intelligence Future Fleets Report 2024

The report paints a picture of the equipment landscape and includes detailed profiles of mines that are employing these fleets

editions

Mining Magazine Intelligence Digitalisation Report 2023

An in-depth review of operations that use digitalisation technology to drive improvements across all areas of mining production

editions

Mining Magazine Intelligence Automation Report 2023

An in-depth review of operations using autonomous solutions in every region and sector, including analysis of the factors driving investment decisions

editions

Mining Magazine Intelligence Exploration Report 2023 (feat. Opaxe data)

A comprehensive review of current exploration rates, trending exploration technologies, a ranking of top drill intercepts and a catalogue of 2022 Initial Resource Estimates and recent discovery successes.